Skip to content
How It WorksFor Tradespeople
List for FreeLog In

This is general guidance based on standard permitted development rights in England. Rules differ for listed buildings, conservation areas, and properties with Article 4 directions. Always confirm with your local planning authority before starting work.

Usually Permitted Development

Do I Need Planning Permission for a EV Charging Point?

Installing an electric vehicle charging point on your property. Wall-mounted and post-mounted chargers have specific permitted development rights under Part 2 of the GPDO.

The General Position

This project is usually allowed under permitted development rights without needing to apply for planning permission, provided certain conditions and limits are met.

Generally permitted under Part 2, Class D of the GPDO. One charging point is permitted per property. Wall-mounted units must not face a highway. The unit must not exceed 0.2 cubic metres in volume.

Conditions and Requirements

  • 1One charging point per property under PD
  • 2Wall-mounted units must not be on a wall facing a highway
  • 3Must not exceed 0.2 cubic metres in volume
  • 4Must not be within 2m of a highway (for post-mounted units in designated areas)
  • 5Must not be on a listed building or within the curtilage of a listed building (in designated areas)

Size and Dimension Limits

  • Maximum volume: 0.2 cubic metres
  • One unit per property under PD

When Permitted Development Does Not Apply

  • Not PD on listed buildings or within the curtilage of a listed building in designated areas
  • Post-mounted units in designated areas must not be within 2m of a highway
  • A second charger requires planning permission
  • Electrical installation must be carried out by a qualified electrician

What About Building Regulations?

Building regulations approval is likely required

The electrical installation must comply with Building Regulations Part P. The work should be carried out by a registered electrician (NICEIC, NAPIT, or equivalent) who can self-certify the installation. The charger must comply with BS 7671 (IET Wiring Regulations) and have appropriate circuit protection.

Building regulations are separate from planning permission. You may need both, one, or neither depending on your project. Building regulations cover the safety and quality of building work, including structural integrity, fire safety, insulation, ventilation, and drainage.

How to Apply for Planning Permission

1

Check if you need permission

Review the permitted development rules above. If in doubt, contact your council or apply for a Lawful Development Certificate.

2

Prepare your application

You will need scaled drawings, a site plan, and a completed application form. An architect or planning consultant can help with this.

3

Submit to your local council

Applications can be submitted online via the Planning Portal or directly to your council. Select your council below for a direct link.

4

Wait for a decision

8 weeks for householder planning applications if PP is needed..

Application cost: £258.

What Happens If I Build Without Permission?

Very low risk. EV chargers are small and unobtrusive. Enforcement is only likely if the unit is on a listed building without consent or is a second unit installed without permission.

Find a EV Charger Installer for Your EV Charging Point

Browse local ev charger installers on Tradesfolk. Read reviews, compare quotes, and hire with confidence. 100% free for homeowners.

Select Your Council

Choose your local council for guidance specific to your area, including links to apply and whether your council has conservation areas or Article 4 directions that could affect your project.

CA = has conservation areas. A4 = has Article 4 directions. These may restrict your permitted development rights.