This is general guidance based on standard permitted development rights in England. Rules differ for listed buildings, conservation areas, and properties with Article 4 directions. Always confirm with your local planning authority before starting work.
Do I Need Planning Permission for a Flue or Extraction System?
Installing a flue, chimney, or extraction system on your property (for example, for a kitchen extractor, boiler, or stove). The permitted development rules are the same as for new chimney/flue installation.
The General Position
This project is usually allowed under permitted development rights without needing to apply for planning permission, provided certain conditions and limits are met.
Generally permitted under Part 1, Class G of the GPDO. One flue, chimney, or soil and vent pipe is permitted on a dwelling provided it does not exceed the highest part of the roof by more than 1 metre. The flue must not be on the principal elevation in designated areas.
Conditions and Requirements
- 1Must not exceed the highest part of the roof by more than 1m
- 2Only one flue per dwelling under PD
- 3Must not be on the principal elevation or side elevation fronting a highway in designated areas
- 4Kitchen extraction: external vent or ducting follows the same rules
- 5Must comply with clean air legislation if for a combustion appliance
Size and Dimension Limits
- Must not exceed the highest part of the roof by more than 1m
- One flue only under PD
When Permitted Development Does Not Apply
- Listed buildings require listed building consent
- In conservation areas, position and appearance restrictions apply
- Odour and noise from extraction systems can be a statutory nuisance
- Additional flues beyond the first require planning permission
What About Building Regulations?
Building Regulations apply if the flue or extraction system serves a combustion appliance (Part J). Kitchen and bathroom extraction must comply with Part F (ventilation). Gas flues must be installed by a Gas Safe registered engineer. A HETAS-registered installer can self-certify solid fuel installations.
Building regulations are separate from planning permission. You may need both, one, or neither depending on your project. Building regulations cover the safety and quality of building work, including structural integrity, fire safety, insulation, ventilation, and drainage.
How to Apply for Planning Permission
Check if you need permission
Review the permitted development rules above. If in doubt, contact your council or apply for a Lawful Development Certificate.
Prepare your application
You will need scaled drawings, a site plan, and a completed application form. An architect or planning consultant can help with this.
Submit to your local council
Applications can be submitted online via the Planning Portal or directly to your council. Select your council below for a direct link.
Wait for a decision
8 weeks for householder planning applications if PP is needed..
Application cost: £258.
What Happens If I Build Without Permission?
Low risk for standard domestic flues within PD limits. Extraction systems that cause odour or noise nuisance to neighbours are more likely to be addressed under environmental health legislation than planning enforcement.
Find a Builder for Your Flue or Extraction System
Browse local builders on Tradesfolk. Read reviews, compare quotes, and hire with confidence. 100% free for homeowners.
Select Your Council
Choose your local council for guidance specific to your area, including links to apply and whether your council has conservation areas or Article 4 directions that could affect your project.
London
South East
South West
East of England
East Midlands
West Midlands
North East
North West
Yorkshire and the Humber
CA = has conservation areas. A4 = has Article 4 directions. These may restrict your permitted development rights.