This is general guidance based on standard permitted development rights in England. Rules differ for listed buildings, conservation areas, and properties with Article 4 directions. Always confirm with your local planning authority before starting work.
Do I Need Planning Permission for a Flue or Extraction System in Barnet?
Installing a flue, chimney, or extraction system on your property (for example, for a kitchen extractor, boiler, or stove). The permitted development rules are the same as for new chimney/flue installation.
Planning in Barnet
75%
of planning applications granted
96%
decided within the statutory or agreed time
79%
of householder applications decided within 8 weeks
In the four quarters to 2026 Q1, Barnet decided 2,541 planning applications. 1,439 of these were householder projects such as extensions, loft conversions and outbuildings, of which 82% were granted.
Planning statistics: MHCLG planning application statistics, the four quarters to 2026 Q1. Conservation area and Article 4 data: planning.data.gov.uk, © Historic England / Crown copyright. Open Government Licence v3.0.
Important: Additional Restrictions May Apply in Barnet
Barnet has 16 conservation areas. These include College Farm, Finchley Church End, Finchley Garden Village, Glenhill Close, Golders Green, Hampstead Garden Suburb. If your property is in a conservation area, some or all permitted development rights may be restricted. For example, you may need planning permission for changes that would normally be permitted, including alterations to the roof, cladding, or extensions visible from a public highway.
Barnet has 15 recorded Article 4 directions. Article 4 directions remove specific permitted development rights in defined areas. If your property is covered by an Article 4 direction, you may need planning permission for work that would normally be permitted. Contact Barnet planning department to check whether an Article 4 direction applies to your property.
Check with Barnet planning department before starting work to confirm whether your property is affected by any special designations.
Permitted Development Rules for a Flue or Extraction System
Generally permitted under Part 1, Class G of the GPDO. One flue, chimney, or soil and vent pipe is permitted on a dwelling provided it does not exceed the highest part of the roof by more than 1 metre. The flue must not be on the principal elevation in designated areas.
Conditions
- 1Must not exceed the highest part of the roof by more than 1m
- 2Only one flue per dwelling under PD
- 3Must not be on the principal elevation or side elevation fronting a highway in designated areas
- 4Kitchen extraction: external vent or ducting follows the same rules
- 5Must comply with clean air legislation if for a combustion appliance
Size and Dimension Limits
- Must not exceed the highest part of the roof by more than 1m
- One flue only under PD
When Permitted Development Does Not Apply
- Listed buildings require listed building consent
- In conservation areas, position and appearance restrictions apply
- Odour and noise from extraction systems can be a statutory nuisance
- Additional flues beyond the first require planning permission
What About Building Regulations?
Building regulations approval is likely required
Building Regulations apply if the flue or extraction system serves a combustion appliance (Part J). Kitchen and bathroom extraction must comply with Part F (ventilation). Gas flues must be installed by a Gas Safe registered engineer. A HETAS-registered installer can self-certify solid fuel installations.
Building regulations are separate from planning permission. Even if your project is permitted development, you may still need building regulations approval. Contact Barnet building control or use an approved inspector.
How to Apply in Barnet
If you need planning permission for your flue or extraction system, you can apply through Barnet's planning department or via the national Planning Portal.
If your project is permitted development and you want written confirmation, you can apply for a Lawful Development Certificate (LDC) from Barnet. This provides proof that your project does not need planning permission, which can be helpful when selling your property.
What Happens If I Build Without Permission?
Low risk for standard domestic flues within PD limits. Extraction systems that cause odour or noise nuisance to neighbours are more likely to be addressed under environmental health legislation than planning enforcement.
Frequently Asked Questions
Do I need planning permission for a flue or extraction system in Barnet?
Does a flue or extraction system in Barnet need building regulations?
How do I apply for planning permission in Barnet?
How long does planning permission take in Barnet?
What percentage of planning applications does Barnet approve?
Find a Builder in Barnet
Browse local builders on Tradesfolk. Read reviews, compare quotes, and hire with confidence. 100% free for homeowners, always.