Skip to content

This is general guidance based on standard permitted development rights in England. Rules differ for listed buildings, conservation areas, and properties with Article 4 directions. Always confirm with your local planning authority before starting work.

Usually Permitted DevelopmentStevenage (East of England)

Do I Need Planning Permission for a New Chimney or Flue in Stevenage?

Installing a new chimney or flue on your property, typically for a wood-burning stove, open fire, or biomass boiler. Permitted development allows one flue per property under specific conditions.

Planning in Stevenage

96%

of planning applications granted

90%

decided within the statutory or agreed time

81%

of householder applications decided within 8 weeks

In the four quarters to 2026 Q1, Stevenage decided 253 planning applications. 133 of these were householder projects such as extensions, loft conversions and outbuildings, of which 96% were granted.

Planning statistics: MHCLG planning application statistics, the four quarters to 2026 Q1. Conservation area and Article 4 data: planning.data.gov.uk, © Historic England / Crown copyright. Open Government Licence v3.0.

Important: Additional Restrictions May Apply in Stevenage

Stevenage has 7 conservation areas. These include Broadwater Conservation Area, Old Town High Street Conservation Area, Orchard Road Conservation Area, Shephall Green Conservation Area, St. Nicholas / Rectory Lane Conservation Area, Symonds Green Conservation Area. If your property is in a conservation area, some or all permitted development rights may be restricted. For example, you may need planning permission for changes that would normally be permitted, including alterations to the roof, cladding, or extensions visible from a public highway.

Stevenage has 126 recorded Article 4 directions. These include Balbir House VISHKARMA PARK Norton Green Road Stevenage; CAXTON POINT Caxton Way Stevenage; Redemption House Gunnels Wood Park; Solutions House Crompton Road Stevenage. Article 4 directions remove specific permitted development rights in defined areas. If your property is covered by an Article 4 direction, you may need planning permission for work that would normally be permitted. Contact Stevenage planning department to check whether an Article 4 direction applies to your property.

Check with Stevenage planning department before starting work to confirm whether your property is affected by any special designations.

Permitted Development Rules for a New Chimney or Flue

Generally permitted under Part 1, Class G of the GPDO. One flue is permitted on a dwelling house provided it does not exceed the highest part of the roof by more than 1 metre. The flue must not be on the principal elevation or a side elevation fronting a highway.

Conditions

  • 1Must not exceed the highest part of the roof by more than 1 metre
  • 2Only one flue per dwelling under PD
  • 3Must not be installed on the principal elevation or a side elevation visible from a highway (in designated areas)
  • 4Must comply with clean air legislation if in a smoke control area

Size and Dimension Limits

  • Must not exceed the highest part of the roof by more than 1m
  • One flue only under PD rights

When Permitted Development Does Not Apply

  • Smoke control areas restrict the type of fuel and appliance that can be used
  • Listed buildings require listed building consent
  • In conservation areas, additional restrictions may apply to the flue's position and appearance
  • Additional flues beyond the first require planning permission

What About Building Regulations?

Building regulations approval is likely required

Building Regulations approval is required covering flue design and installation (Part J, combustion appliances and fuel storage), fire safety (distance from combustible materials), ventilation (adequate air supply to the appliance), and carbon monoxide detection. A HETAS-registered installer can self-certify the work.

Building regulations are separate from planning permission. Even if your project is permitted development, you may still need building regulations approval. Contact Stevenage building control or use an approved inspector.

How to Apply in Stevenage

If you need planning permission for your new chimney or flue, you can apply through Stevenage's planning department or via the national Planning Portal.

Timeline:8 weeks for householder planning applications if PP is needed.
Cost:£258
Visit Stevenage Planning

If your project is permitted development and you want written confirmation, you can apply for a Lawful Development Certificate (LDC) from Stevenage. This provides proof that your project does not need planning permission, which can be helpful when selling your property.

What Happens If I Build Without Permission?

Low risk for a single flue within PD limits. Flues that are excessively tall or in prominent positions may attract enforcement. Installing a wood burner in a smoke control area without an approved appliance is an offence under the Clean Air Act.

Frequently Asked Questions

Do I need planning permission for a new chimney or flue in Stevenage?
Generally permitted under Part 1, Class G of the GPDO. One flue is permitted on a dwelling house provided it does not exceed the highest part of the roof by more than 1 metre. The flue must not be on the principal elevation or a side elevation fronting a highway. Note: Stevenage has 7 conservation areas (including Broadwater Conservation Area, Old Town High Street Conservation Area, Orchard Road Conservation Area) and 126 recorded Article 4 directions where permitted development rights may be restricted. Check with Stevenage planning department.
Does a new chimney or flue in Stevenage need building regulations?
Yes. Building Regulations approval is required covering flue design and installation (Part J, combustion appliances and fuel storage), fire safety (distance from combustible materials), ventilation (adequate air supply to the appliance), and carbon monoxide detection. A HETAS-registered installer can self-certify the work. Contact Stevenage building control or an approved inspector for details.
How do I apply for planning permission in Stevenage?
You can apply for planning permission through Stevenage's planning department or via the national Planning Portal. £258. 8 weeks for householder planning applications if PP is needed..
How long does planning permission take in Stevenage?
Most planning applications should be decided within 8 weeks (13 weeks for major projects). In the four quarters to 2026 Q1, Stevenage decided 90% of applications within the statutory or agreed time, and 81% of householder applications within 8 weeks.
What percentage of planning applications does Stevenage approve?
Stevenage granted 96% of the 253 planning applications it decided in the four quarters to 2026 Q1. For householder applications such as extensions and outbuildings, the approval rate was 96%.

Find a Builder in Stevenage

Browse local builders on Tradesfolk. Read reviews, compare quotes, and hire with confidence. 100% free for homeowners, always.

New Chimney or Flue rules in nearby council areas

Other projects in Stevenage

Help us improve Tradesfolk

Found a bug or have an idea? Tell us what would make Tradesfolk more useful for you.

For bugs, tell us what you were trying to do and what went wrong.

Add this if you would like us to reply.

Page included with your feedback:

Sent to hello@tradesfolk.co