This is general guidance based on standard permitted development rights in England. Rules differ for listed buildings, conservation areas, and properties with Article 4 directions. Always confirm with your local planning authority before starting work.
Do I Need Planning Permission for an Oil Tank Installation in Nuneaton and Bedworth?
Installing a domestic oil storage tank for heating oil. Oil tanks are treated as outbuildings under permitted development and have specific conditions regarding capacity and position.
Planning in Nuneaton and Bedworth
95%
of planning applications granted
99%
decided within the statutory or agreed time
64%
of householder applications decided within 8 weeks
In the year to December 2025, Nuneaton and Bedworth decided 301 planning applications. 178 of these were householder projects such as extensions, loft conversions and outbuildings, of which 97% were granted.
Planning statistics: MHCLG planning application statistics, the year to December 2025. Conservation area and Article 4 data: planning.data.gov.uk, © Historic England / Crown copyright. Open Government Licence v3.0.
Important: Additional Restrictions May Apply in Nuneaton and Bedworth
Nuneaton and Bedworth has 4 conservation areas. These include Abbey, Bedworth Town Centre, Bulkington, Nuneaton Town Centre. If your property is in a conservation area, some or all permitted development rights may be restricted. For example, you may need planning permission for changes that would normally be permitted, including alterations to the roof, cladding, or extensions visible from a public highway.
Check with Nuneaton and Bedworth planning department before starting work to confirm whether your property is affected by any special designations.
Permitted Development Rules for an Oil Tank Installation
Generally permitted under Part 1, Class E of the GPDO (as an outbuilding). Oil tanks up to 3,500 litres are PD provided they are not between the dwelling and a highway, comply with outbuilding height limits, and do not cover more than half the curtilage.
Conditions
- 1Maximum capacity: 3,500 litres
- 2Must not be between the dwelling and a highway
- 3Must comply with outbuilding PD height limits
- 4Must not cover more than half the curtilage (combined total)
- 5Must be sited in accordance with OFTEC guidelines for fire safety and environmental protection
Size and Dimension Limits
- Capacity: 3,500 litres maximum
- Height: same as outbuildings (2.5m within 2m of boundary; 4m/3m elsewhere)
When Permitted Development Does Not Apply
- Tanks over 3,500 litres are not PD
- Must not be forward of the principal elevation
- Environmental regulations apply to prevent oil spills (Oil Storage Regulations 2001)
- Secondary containment (bunding) is required for tanks over 200 litres in certain areas
What About Building Regulations?
Building regulations approval is likely required
Building Regulations apply under Part J (combustion appliances and fuel storage). Covers tank construction, bunding and secondary containment, fire separation distances from buildings, ventilation, and oil supply pipework. An OFTEC-registered installer can self-certify the work.
Building regulations are separate from planning permission. Even if your project is permitted development, you may still need building regulations approval. Contact Nuneaton and Bedworth building control or use an approved inspector.
How to Apply in Nuneaton and Bedworth
If you need planning permission for your oil tank installation, you can apply through Nuneaton and Bedworth's planning department or via the national Planning Portal.
If your project is permitted development and you want written confirmation, you can apply for a Lawful Development Certificate (LDC) from Nuneaton and Bedworth. This provides proof that your project does not need planning permission, which can be helpful when selling your property.
What Happens If I Build Without Permission?
Low planning enforcement risk for tanks within PD limits. Environmental enforcement is a greater concern: oil spills from poorly installed or maintained tanks can result in prosecution by the Environment Agency and clean-up costs of tens of thousands of pounds.
Frequently Asked Questions
Do I need planning permission for an oil tank installation in Nuneaton and Bedworth?
Does an oil tank installation in Nuneaton and Bedworth need building regulations?
How do I apply for planning permission in Nuneaton and Bedworth?
How long does planning permission take in Nuneaton and Bedworth?
What percentage of planning applications does Nuneaton and Bedworth approve?
Find a Heating Engineer in Nuneaton and Bedworth
Browse local heating engineers on Tradesfolk. Read reviews, compare quotes, and hire with confidence. 100% free for homeowners, always.